Back to Woodworking Equipment Index

MORTISERS

TAMA  MS-3816 SQUARE CHISEL MORTISER BENCH MODEL WITHOUT FLOOR STAND Features §         Cast iron machine with moving table and work clamp. §         Drill bit held by 13mm drill chuck on motor shaft. §         Square chisel held by clamping bolt in cast iron head. §         Complete work head strokes up and down by hand lever. §         Cast iron work table moves sideways by central lever, and adjusts in and out by knurled knob. §         Screw type work clamp locks timber onto work table. §         Depth stops can be pre-set on head rise & fall.   Specifications Capacity of square chisels                                                       6 mm to 16 mm Maximum stroke of head travel                                                            105 mm Maximum mortising depth                                                                    76 mm Maximum in & out table adjustment                                                      40 mm Maximum left to right table stroke                                                        200 mm Dimensions of cast iron table                                               200 mm x 160 mm Single phase electric motor                                                                   0.5 hp Nett weight of machine                                                                         42 kgs Quality Heavy Duty - LOW  Price. A$ 360.00 + GST + Delivery & Handling Note: Prices are subject to change. Please check before you order.
TAMA MS-3840 SQUARE CHISEL MORTISER SQUARE CHISEL MORTISING MACHINE Features Cast iron machine on sheet steel cabinet stand. Drill bit held by 16mm drill chuck on motor shaft. Square chisel held by clamping bolt in cast iron head. Complete work head strokes up and down by hand lever. Cast iron work table moves sideways by central handwheel, and adjusts in and out by left handwheel. Quick action work clamp locks timber onto work table. Quick action top clamps hold timber down hard on table. Length stops can be pre-set to right of work table.   Specifications Capacity of square chisels                      6 mm to 25 mm Maximum stroke of head travel                            210 mm Maximum in & out table adjustment                     145 mm Maximum left to right table stroke                        170 mm Dimensions of cast iron table               400 mm x 150 mm Single phase electric motor                                      1 hp Weight of machine                                             108 kgs Quality Heavy Duty unit. A$ 780.00 + GST + Delivery & Handling Note: Prices are subject to change. Please check before you order.
TAMA CT-1913 SQUARE CHISEL MORTISER Specifications §         Cast iron machine on sheet steel cabinet stand. §         Drill bit held by 16mm drill chuck on motor shaft. §         Square chisel held by clamping bolt in cast iron head. §         Complete work head strokes up and down by hand lever with counter weight to assist lifting. §         Convenient large hand wheel for two operations – 1.       Lateral movement of work table to centre the mortise. 2.       Longitudinal movement of work table when mortising. §         Cast iron work clamp locks timber onto work table. §         A depth stop can be pre-set to correct mortise depth. §         Magnetic switchgear with no-volt release & overload protection.   Technical Data Capacity of square chisels                    6 mm to 25 mm Maximum stroke of head travel                         125 mm Maximum in & out table adjustment                   90 mm Maximum left to right table stroke                    400 mm Dimensions of cast iron table           513 mm x 167 mm Single phase electric motor                                  1 hp Weight of machine                                         165 kgs Quality - Heavy Duty. A$ 1,630.00 + GST + Delivery & Handling Note: Prices are subject to change. Please check before you order.
TAMA CT-2305 HEAVY DUTY SQUARE CHISEL MORTISER   Specifications §         Industrial machine with capacity to mortise doors. §         Cast iron machine on sheet steel cabinet stand. §         Drill bit held by 16mm drill chuck on motor shaft. §         Square chisel held by clamping bolt in cast iron head. §         Complete work head strokes up and down by hand lever. §         Hand lever movement forward & back of work head, to centre mortices in timber of various widths. §         Hand lever longitudinal movement of work head to left and right, to set desired length of mortice. §         Work table tiltable up to 90º, to mortise ends of timber to maximum 1 metre long. §         Cast iron work clamp locks timber onto work table. §         Mortise length stops can be pre-set to stop work table. §         Magnetic switchgear with no-volt release & overload protection.   Technical Data Capacity of square chisels                        6mm to 25mm Maximum in & out head adjustment                     100mm Maximum left to right head stroke                        440mm Dimensions of cast iron table     approx. 350mm x 200mm Single phase electric motor                                    1.5hp Weight of machine                                             210 kgs Equipment for professional use. A$ 2,350.00 + GST + Delivery & Handling Note: Prices are subject to change. Please check before you order.
Back to Woodworking Equipment Index