PO Box
445, Park Holme, SA 5043Ph: 0417 820 Fax: (08) 8358 5952 Email: sales@tama.com.au |
|
ROUTER TABLES |
|
TAMA model BX-6 ROUTER TABLE Specifications§ Cast iron machined work table for accurate work. § Table lifts up to fit router in place. § Cast iron cutter guard with 100mm diameter dust outlet. § Two aluminium guide fences mounted to cutter guard. § Two spring hold downs mounted to cutter guard. § Mitre gauge sliding across table in machined slot. § Floor stand of pressed steel – open leg type. § On-off switch with cord and 3-pin plug. § Router plugs into socket on rear of switch box. § Will accept any commercial brand of commercial portable router.
Technical Data Size of cast iron work table 680mm x 510mm Table height from floor 850mm Size of each aluminium fence 270mm x 50mm Tilt of table to mount router 45º
The most versatile, top quality router table. Note: Prices are subject to change. Please check before you order. |
![]() |
|
TAMA
model BXZ-3 ROUTER TABLE BXZ-3 ROUTER TABLE
Specifications § Will accept any brand of portable router up to 5hp. § Sliding aluminium front section of work table. § Machined cast iron rear section of work table. § Circular opening in work table for router cutters. § Independently adjustable aluminium guide fences. § Safety guard assembly with rear dust exhaust outlet. § Convenient spring steel hold-downs on safety guard. § Complete top table assembly tilts 45° to insert router. § Router clamps securely below cast iron work table. § Crosscutting fence and work clamp on sliding table. § On/off switch, power socket for router, cord and plug. § Stable, open leg, pressed steel floor stand. § A versatile router table, ideal for tenoning work.
Technical DataDimensions of cast iron table section 780mm x 250mm Dimensions of aluminium sliding table 784mm x 310mm Diameter of dust exhaust outlet 50mm (2”) Height of work table from floor 850mm Dimensions of each guide fence 270mm x 50mm Nett weight of table (without router) 54kgs Best
Value money can buy.
Note: Prices are subject to change. Please check before you order. |
![]() |
|
Back to TAMA Woodworking Machines Index HOME
PAGE - ABOUT US - SPECIALS
- HAND
TOOLS - PNEUMATIC
PRESSES - DIE
SETS & PRESS TOOLING |
|
TAMA
Tools & Machinery Pty Ltd trading as LUNA
Machinery S.A.
PO Box 445,
Park Holme, SA 5043
Ph: 0417 820 307 Fax: (08) 8358
5952
E-mail: sales@tama.com.au