PO Box 445, Park Holme,  SA 5043
     Ph: 0417 820 307  Fax: (08) 8358 5952
     Email: sales@tama.com.au

Back to Woodworking Equipment Index

SANDERS - BELT & DISC

TAMA BDS-69 BELT/DISC SANDER

 

Specifications

§         9” Diameter sanding disc and 6” x 48” sanding belt.

§         3/4hp Single phase motor with v-belt drive.

§         Tilting work table with mitre gauge for belt or disc.

§         Cast iron machine with sheet steel floor stand.

§         Superior Taiwanese model – accurate and smooth running.

§         Push button on/off switches.

Quality Heavy Duty - LOW  Price.
A$ 360.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA SBD-6012Q BELT/DISC SANDER

Specifications

§         152mm (6”) wide x 1220mm (48”) long sanding belt.

§         305mm (12”) diameter sanding disc.

§         1.5hp 3 phase or single phase motor.

§         Dust exhaust connection chutes on both belt & disc.

§         Tilting cast iron work tables on both belt & disc.

§         Fully enclosed, cabinet style floor stand.

§         School approved magnetic switch box with mushroom head emergency stop button and a second emergency stop on the disc side.

 

Quality Heavy Duty -  unit for professional use.
A$ 1,200.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

SANDERS - BELT EDGE 

TAMA BOY-6X48 BELT EDGE SANDER

 

Specifications

§         Sanding belt tilts to 90° to work vertically or horizontally.

§         Single phase 0.75hp motor with on/off switch.

§         Aluminium work table 440mm long x 254mm wide.

§         Stable open leg fabricated steel floor stand.

§         End support table included for curved sanding.

§         Dust exhaust outlet at motor end of machine.

 

Quality Heavy Duty  - Low Cost.
A$ 540.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

BIG BOY 80 VERTICAL OR HORIZONTAL BELT SANDING MACHINE

 

Specifications

§         Single phase or three phase 1.5hp motor with push button switches.

§         Complete sanding belt assembly tilts 90 degrees to work either horizontally or vertically as an edge sander, or at any angle in between.

§         Cast iron work table with angle gauge sliding in a dovetail slot.

§         Fabricated sheet steel floor stand with wide base for good support.

§         Lever action quick tensioning of sanding belt.

§         Simple belt tracking adjustment to keep belt running on pulleys.

§         Cast iron work stop mounted across sanding belt.

§         Dust extraction take-off on motor end of sanding belt.

§         Cast iron support table on opposite end for curved work sanding.

 

Technical Data

Width of sanding belt                                                                          150 mm

Length of sanding belt                                                                       2260 mm

Size of cast iron work table                                                    686 mm x 249 mm

Length of working surface                                                                    800 mm

Speed of sanding belts                                                           980 metre/minute

Nett weight of machine                                                                           99 kg

 

Quality Heavy Duty  unit for professional use.
A$ 1,270.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA BOY-6X132 LARGE BELT EDGE SANDER

 

Specifications

§         3hp three phase motor with push button on/off switch.

§         Complete sanding belt assembly tilts 90 degrees to work either horizontally or vertically as an edge sander, or at any angle in between.

§         Aluminium work table with angle gauge sliding in a dovetail slot.

§         Fabricated sheet steel floor stand with wide base for good support.

§         Lever action quick tensioning of sanding belt.

§         Simple belt tracking adjustment to keep belt running on pulleys.

§         Cast iron work stop mounted across sanding belt.

§         Dust extraction take-off on motor end of sanding belt.

§         Cast iron support table on opposite end for curved work sanding.

 

Technical Data

Width of sanding belt                                                                          150 mm

Length of sanding belt                                                                       3352 mm

Size of aluminium work table                                                  1295 mm x 381 mm

Length of working surface                                                                   1350mm

Speed of sanding belts                                                           886 metre/minute

Nett weight of machine                                                                         195 kg

 

Quality Heavy Duty  unit for professional use.
A$ 2,150.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA ES-6108 OSCILLATING BELT EDGE SANDER

 

Specifications

§         3hp three phase motor with push button on/off switch.

§         Complete sanding belt assembly tilts 90 degrees to work either horizontally or vertically as an edge sander, or at any angle in between.

§         Cast iron work table with angle gauge at right hand end.

§         Fabricated sheet steel cabinet stand with wide base for good support.

§         Lever action quick tensioning of sanding belt.

§         Simple belt tracking adjustment to keep belt running on pulleys.

§         Cast iron work stop mounted across sanding belt.

§         Dust extraction take-off on both ends of sanding belt.

§         Cast iron support table on opposite end for curved work sanding.

§         One set of 3 sanding bobbins – 38, 51 and 76mm diameter.

 

Technical Data

Width of sanding belt                                                                           152mm

Length of sanding belt                                                                        2743mm

Size of aluminium work table                                                     900mm x 305mm

Length of working surface                                                                   1000mm

Speed of sanding belts                                                           960 metre/minute

Nett weight of machine                                                                          220kg

 

Quality Heavy Duty  unit for professional use.
A$ 3,350.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

SANDERS - VERTICAL BOBBIN

TAMA MM-16

SMALL OSCILLATING VERTICAL BOBBIN SANDER

 

§         Single phase 0.25hp motor with on/off switch.

§         Four pole motor to work at sanding speed of 1440rpm.

§         Six bobbins included from 12.7mm to 75mm diameter.

§         Bobbins oscillate up and down to spread work load on sandpaper.

§         Bench model with white laminated board table.

§         Six metal table inserts to suit all six bobbins.

§         Six spindles moulded into machine body to store bobbins not being used.

§         Dust extraction port below work table.

 

      An excellent value-for-money sander!

A$ 210.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA MM-326 SMALL OSCILLATING BOBBIN SANDER

Designed for intricate contour edge sanding and fine finishing.

Specifications

§         Single phase 0.5hp motor with on/off switch.

§         Four pole motor to work at sanding speed of 1440rpm.

§         Cast iron work table of 370mm square, tilting 45º to front.

§         22mm, 38mm and 51mm diameter bobbins as standard equipment.

§         Bobbin oscillation stroke of 24mm to spread work load on sandpaper sleeve.

§         Dust extraction chute below work table.

§         Nett weight of machine – 30kg.

§         All standard equipment as shown on leaflet.

 

      An excellent value-for-money sander!

A$ 360.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA OVS-K OSCILLATING VERTICAL BOBBIN SANDER

 

Specifications

§         0.5hp Single phase motor, 4 pole, 1440rpm.

§         Push button on/off switches with protruding red stop button.

§         Cast iron work table of 370mm square, tilting to 45° to front.

§         50mm (2”) diameter bobbin only as standard.

§         6mm, 12mm, 16mm and 38mm bobbins available as extras.

§         Bobbin oscillation stroke of 12mm to spread workload on sandpaper sleeve.

§         Four table insert plates to suit different bobbins.

§         Dust extraction chute below work table.

§         Nett weight of machine – 30kg.

§         All standard equipment as shown on leaflet.

 

An excellent value for professional use!

A$ 540.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

LEDA OVS-JM OSCILLATING VERTICAL BOBBIN SANDER

 

§         Specifications

§         Industrial version with heavy enclosed machine base.

§         1hp single or three phase motor with push button on/off switch.

§         Four pole motor to work at sanding speed of 1440rpm.

§         Cast iron work table 610mm square, tilting to 45º to front.

§         Bobbin oscillation stroke of 38mm to spread workload on sandpaper sleeves.

§         Oscillation stroke sliding inside oil bath (75 per minute) for best wear resistance and long service life.

§         Dust extraction chute of 4” diameter below work table.

§         Nett weight of machine – 137kg.

§        Ten bobbins from 6mm to 100mm diameter included as standard.

 

Heavy Duty - built for professional use.

A$ 2,180.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

SANDERS - HORIZONTAL BOBBIN

TAMA MMT-3125

DOUBLE PNEUMATIC HORIZONTAL BOBBIN SANDER

 

DOUBLE ENDED HORIZONTAL BOBBIN and/or BRUSH BACKED SANDING HEAD SANDER for random shaped component sanding

 

Specifications

§         Floor stand supporting 1hp single phase motor with long shafts both ends to take sanding heads.

§         Four pole motor with ideal sanding speed of 1440rpm.

§         Machine is designed to have work pieces held by operator against sanding heads to sand free shapes.

§         Two pneumatic bobbins included –

§         80mm dim x 230mm long

§         120mm dim x 230mm long

§         One brushed back sanding head included – 210 dim x 160mm long.

 

      A very useful novelty sander for special shapes - surprisingly low price.

A$ 2,180.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

DISC SANDERS

TAMA DS-12 12" DISC SANDER

 

Specifications

§         1hp Single phase motor with disc mounted directly on motor shaft.

§         Four pole motor for ideal sanding speed of 1440rpm.

§         Push button on/off switches with protruding red stop button.

§         Cast iron tilting work table with mitre gauge.

§         All standard equipment as shown on leaflet.

§         Bench model – no floor stand.

 

Quality at low cost.
A$ 250.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA DS-20 DISC SANDER

 

Specifications

§         508mm (20”) diameter machined steel sanding disc.

§         3hp three phase motor with disc mounted on motor shaft.

§         Four pole motor for ideal sanding speed of 1440rpm.

§         Magnetic switchgear with overload protection, no-volt release, green start button and red mushroom head stop button.

§         Heavy cast iron base provides stability.

§         Rack and pinion rise and fall of work table, counterbalanced by a coil spring inside heavy support post.

§         Rack and pinion tilting of work table with clear angle scale.

§         Disc fully guarded below table, with 4” diameter dust outlet.

§         Wrap over top guard leaving only the work area exposed.

 

Technical Data

Table tilting angles                                                  45º forward / 15º backward

Cast iron table dimensions                                                      700 mm x 266 mm

Overall height of machine                                                                   1232 mm

Nett weight of machine                                                                         180 kg

 

Quality Heavy Duty  unit for professional use.
A$ 2,850.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

SANDERS - HORIZONTAL DRUM

TAMA DS-1632A 16" (406mm) SINGLE DRUM SANDER

 

Specifications

§         Automatic feed of work pieces through machine by conveyor belt below.

§         Flat sanding of work pieces by a single top sanding drum.

§         Sanding drum driven by single phase, 1hp, 1440rpm motor.

§         Maximum working width of machine – 16” (406mm).

§         Open side design allows up to 32” wide panels to be sanded in two passes by rotating the panels.

§         Variable speed motor on feed conveyor belt of 1/8 hp.

§         Drum height setting by hand wheel on top of machine.

§         Depth scale on support column to set height.

§         Lid lifts up above sanding drum to change abrasive paper.

§         Dust extractor outlet on top lid to attach small hose.

§         Floor stand with open legs included with machine.

 

Technical Data

Maximum working height                                                         127 mm (5”)

Maximum sanding in one pass                                                        1.0 mm

Speed of sanding drums                                                              1440 rpm

Variable feed speed range                                                 0 to 1.22 m/min

Diameter of sanding drum                                                       127 mm (5”)

Nett weight of machine & stand                                                       55 kg

 

Quality Heavy Duty  unit for professional use.
A$ 1,210.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA DS-25 25" (635mm) DOUBLE DRUM SANDER

Specifications

§         3hp Single phase main motor, driving both sanding drums.

§         Small single phase DC variable speed feed motor of 1/8 hp.

§         635mm maximum working width x 127mm max. depth.

§         Workpieces power fed through machine by conveyor belt below.

§         Magnetic on/off switchbox with mushroom head stop switch.

§         Table height setting by crank shaft handle on top of machine.

§         Dept scale on left side to set height required.

§         Lid on top lifts up to change abrasive papers.

§         Adjustments for height on second sanding drum.

§         Two 4” diameter dust exhaust outlets on top.

§         Floor standing machine with enclosed base.

§         All standard equipment as shown on machine leaflet.

 

Technical Data

Maximum working height                                                              127 mm (5”)

Maximum sanding in one pass                                                             1.5 mm

Speed of sanding drums                                                                   1600 rpm

Variable feed speed range                                                            2 to 9 m/min

Diameter of sanding drums                                                            127 mm (5”)

Nett weight of machine                                                                         180 kg

 

Quality Heavy Duty  unit for professional use.
A$ 2,880.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA SL-2524 25" (625mm) WIDE DOUBLE DRUM SANDER

 

Specifications

§         Two 150mm (6”) diameter steel sanding drums with 6” wide abrasive paper attached, to flat sand timber components.

§         Work pieces fed through machine on driven conveyor belt.

§         Conveyor height adjustment by large hand wheel above.

§         Emergency stop of machine by safety bar across in-feed.

§         Lift up lid on top to access drums for abrasive changes.

§         Height adjustments on second drum to set cutting depth.

§         Two 100mm (4”) diameter dust exhaust outlets on top.

§         Fully enclosed, industrial strength drum sander.

§         Magnetic switchbox with overload and no-volt protection.

 

Technical Data

Maximum working height                                                               635 mm (25”)

Minimum working height                                                                 102 mm (4”)

Speed of sanding drums                                                                    1440 rpm

Speed of feed conveyor belt                                                              3.7 m/min

Three phase motor to drive drums                                                              5 hp

Three phase feed drive motor                                                                0.25 hp

Nett weight of machine                                                                         380 kg

 

Quality Heavy Duty  unit for professional use.

A$ 5,200.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA SL-3724 37" (940mm) DOUBLE DRUM SANDER

Technical Data

Maximum working height                                                               940 mm (37”)

Minimum working height                                                                 102 mm (4”)

Speed of sanding drums                                                                     1440 rpm

Speed of feed conveyor belt                                                              3.7 m/min

Three phase motor to drive drums                                                             5 hp

Three phase feed drive motor                                                                0.25 hp

Nett weight of machine                                                                         460 kg

 

Quality Heavy Duty  unit for professional use.

A$ 6,830.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 
 

TAMA SL-5424 54" (1370mm) WIDE DOUBLE DRUM SANDER

 

Technical Data

Maximum working height                                                             1370 mm (54”)

Minimum working height                                                                 102 mm (4”)

Speed of sanding drums                                                                    1440 rpm

Speed of feed conveyor belt                                                              3.7 m/min

Three phase motor to drive drums                                                            10 hp

Three phase feed drive motor                                                                  0.5 hp

Nett weight of machine                                                                         550 kg

 

Quality Heavy Duty  unit for professional use.

A$ 13,860.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

Back to Woodworking Equipment Index

HOME PAGE - ABOUT US - SPECIALS - HAND TOOLS - PNEUMATIC PRESSES - DIE SETS & PRESS TOOLING
ALUMINIUM FABRICATING EQUIPMENT WOODWORKING MACHINES -  
MACHINE VISION SYSTEMS
- SPECIAL PURPOSE BUILT MACHINERY - OTHER SERVICES - CONTACT US

TAMA Tools & Machinery Pty Ltd  trading as  LUNA Machinery S.A.
PO Box 445, Park Holme, SA 5043
Ph: 0417 820 307   Fax: (08) 8358 5952
E-mail: sales@tama.com.au