PO Box 445, Park Holme, SA 5043
     Ph: 0417 820 307  Fax: (08) 8358 5952
     Email: sales@tama.com.au

Back to Woodworking Index

Scroll Saw / Radial Arm Saws
TAMA MS-24 SCROLL SAW

 

Specifications

§         Two working speeds of 710 and 1420rpm.

§         610mm (24) throat width on machine.

§         Cast iron tilting work table – 520mm x 280mm.

§         Smooth operation with minimum vibration.

§         Blade holders for pinned and pinless blades.

§         Combination blade guard and work hold-down.

§         Dust blower to clear dust from drawn pattern.

§         0.125hp single phase motor with on/off switch.

§         Mushroom head safety stop switch to isolate motor.

§         All standard equipment as shown on machine photograph

Quality Heavy Duty Equipment for an unbeatable Price.
A$ 590.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA  BS-168 RADIAL ARM SAW

RADIAL ARM SAW WITH SPECIAL ELECTRIC BRAKE MOTOR

Specifications

§         Medium duty machine with ribbed cast iron arm.

§         Arm mounted on large vertical column for rigidity.

§         Pressed steel base and legs support column and work table.

§         Convenient handle on saw carriage with inbuilt switch.

§         Automatic saw carriage return spring device provided.

§         Carriage runs below cast iorn arm on four adjustable rollers.

§         Three-way head movements allow a variety of options –

1.       Blade tilts down from vertical, 90 degree maximum, to horizontal position.

2.       Head swivels around 90 degrees to allow ripping of timber.

3.       Arm swivels around 45 degrees to left or right, to allow angles to be cut.

4.       A combination of No.1 and No.3 allows compound angles to be cut.

§         Top half of TCT saw blade covered by metal safety guard.

§         Bottom half of blade protected by side guards that lift over work pieces.

 

Technical Data

Motor with electric brake                        1 hp Single Phase or 2hp Three Phase

Motor speed                                                                                    2880 rpm

Diameter of standard TCT saw blade                                                    300 mm

Motor arbor diameter                                                                    25.4mm (1”)

Maximum cross-cut capacity                                                              420 mm

Maximum depth of cut                                                                          80 mm

Maximum ripping width capacity                                                          700 mm

Mitre locating stops                                                                  -45º / 0º / +45º

Bevel locating stops                                                                    0º / 45º / 90º

Bearing rollers in saw carriage                                                                       4

Work table size                                                                        650 x 800 mm

Overall dimensions                                                         800 x 650 x 1100 mm

Quality Heavy Duty - LOW Price.
A$ 2,680.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA MODEL BS-888 RADIAL ARM SAW

WITH SPECIAL ELECTRIC BRAKE MOTOR AND CE COMPLIANCE

 

Specifications

§         Heavy duty machine with ribbed cast iron arm.

§         Arm mounted on large vertical column for rigidity.

§         Pressed steel base and legs support column and work table.

§         Convenient handle on saw carriage with inbuilt switch.

§         Automatic saw carriage return spring device provided.

§         Replaceable steel runner bars inside arm, on which the eight carriage bearings run.

§         Three-way head movements allow a variety of options –

1.       Blade tilts down from vertical, 90 degree maximum, to horizontal position.

2.       Head swivels around 90 degrees to allow ripping of timber.

3.       Arm swivels around 45 degrees to left or right, to allow angles to be cut.

4.       A combination of No.1 and No.3 allows compound angles to be cut.

§         Top half of TCT saw blade covered by metal safety guard.

§         Bottom half of blade protected by side guards that lift over workpieces.

 

Technical Data

Motor with electric brake                   2.5 hp Single Phase or 4.5hp Three Phase

Motor speed                                                                                    2880 rpm

Diameter of standard TCT saw blade                                                    350 mm

Motor arbor diameter                                                                    25.4mm (1”)

Maximum cross-cut capacity                                                              620 mm

Maximum depth of cut                                                                        105 mm

Maximum ripping width capacity                                                          860 mm

Mitre locating stops                                                                  -45º / 0º / +45º

Bevel locating stops                                                                    0º / 45º / 90º

Bearing rollers in saw carriage                                                                       8

Work table size                                                                       900 x 1100 mm

Overall dimensions                                                      1120 x 1100 x 1170 mm

Quality Heavy Duty - Professional Equipment. 
A$  3,660.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 

TAMA MODEL BS-999 THREE PHASE RADIAL ARM SAW

WITH SPECIAL ELECTRIC BRAKE MOTOR AND CE COMPLIANCE

 

Specifications

§         Heavy duty machine with ribbed cast iron arm.

§         Arm mounted on large vertical column for rigidity.

§         Pressed steel base and legs support column and work table.

§         Convenient handle on saw carriage with inbuilt switch.

§         Automatic saw carriage return spring device provided.

§         Replaceable steel runner bars inside arm, on which the eight carriage bearings run.

§         Three-way head movements allow a variety of options –

1.       Blade tilts down from vertical, 90 degree maximum, to horizontal position.

2.       Head swivels around 90 degrees to allow ripping of timber.

3.       Arm swivels around 45 degrees to left or right, to allow angles to be cut.

4.       A combination of No.1 and No.3 allows compound angles to be cut.

§         Top half of TCT saw blade covered by metal safety guard.

§         Bottom half of blade protected by side guards that lift over workpieces.

 

Technical Data

Three phase motor with electric brake                                                     4.5 hp

Motor speed                                                                                    2880 rpm

Diameter of standard TCT saw blade                                                    400 mm

Motor arbor diameter                                                                    25.4mm (1”)

Maximum cross-cut capacity                                                              900 mm

Maximum depth of cut                                                                        130 mm

Maximum ripping width capacity                                                        1100 mm

Mitre locating stops                                                                  -45º / 0º / +45º

Bevel locating stops                                                                    0º / 45º / 90º

Bearing rollers in saw carriage                                                                       8

Work table size                                                                     1350 x 1250 mm

Overall dimensions                                                      1450 x 1250 x 1600 mm

Quality Heavy Duty - Large Capacity!
A$  4,220.00 + GST + Delivery & Handling

Note: Prices are subject to change. Please check before you order.

 HOME PAGE - ABOUT US - SPECIALS - HAND TOOLS - PNEUMATIC PRESSES - DIE SETS & PRESS TOOLING
ALUMINIUM FABRICATING EQUIPMENT WOODWORKING MACHINES -  
MACHINE VISION SYSTEMS
- SPECIAL PURPOSE BUILT MACHINERY - OTHER SERVICES - CONTACT US

TAMA Tools & Machinery Pty Ltd trading as LUNA Machinery S.A.
PO Box 445, Park Holme, SA 5043
Ph: 0417 820 307   Fax: (08) 8358 5952
E-mail: sales@tama.com.au