TAMA Tools

      PO Box 445, Park Holme, SA 5043
     Ph: 0417 820 307 Fax: (08) 8358 5952
     Email: sales@tama.com.au

Connection to TAMA Head Office Hand Tool Page - Back to INDEX Page


JOGGLER 61 202 A useful tool for working car body components. The combined tool can be set for either punching or bending. Available with 4-5-6-8 mm punches and dies as standard. Capability in 1mm standard mild steel ø 8mm Throat depth (punching) 8mm Jaw width 22mm Overall width 110mm Bending depth 13mm Overall length 290mm Weight 1,2 kg
PUNCHING TOOL SENIOR 11 101 Available with punches and dies from 2mm to 8mm, in 0.10mm increments. Capability in 1.5mm standard mild steel ø 8mm Throat depth 40mm Overall length 320mm Weight 1.8 kg
PUNCHING TOOL JUNIOR 21 101 Available with punches and dies from 2mm to 5mm, in 0.10mm increments. Capability in 1.5mm standard mild steel ø 5mm Throat depth 30 mm Overall length 250 mm Weight 1.0 kg
HAND PUNCH JUNIOR B 31 101 Available with punches and dies from 2mm to 5mm, in 0.10mm increments Capability in 1mm in standard mild steel ø 5mm Throat depth 20 mm Overall length 200 mm Weight 0.8 kg
PUNCHING TOOL JUNIOR D 31 203 Available with punches and dies from 2mm to 5mm, in 0.10mm increments Capability in 1mm standard mild steel ø 5mm Throat depth 15mm Overall length 170mm Weight 0.4 kg
PUNCHING TOOL OVER FLANGES 61 502 For punching of guards. Can be supplied with punches and dies from 4mm to 8 mm. Capability in 1mm standard mild steel ø 8mm Throat depth 30mm Overall width 85 mm Overall length 300 mm Weight 1 kg
PUNCHING TOOL FOR NUMBER PLATES TN 11 102-1 Available with punches and dies from 2mm to 8mm, in 0.10mm increments Capability in 1.25mm standard mild steel ø 8mm Throat depth 60mm Overall length 330mm Weight 1.8 kg
PUNCHING TOOL WITH RETURN SPRING 61 403 Available with punches and dies from 2-8 mm, in 0.10mm increments Capability in 1.0mm standard mild steel ø 8mm Throat depth 15mm Overall length 290mm Weight 1.2 kg
PUNCHING TOOL DOUBLE PUNCH 63 704 A combined tool which can accept two punches of different diameters. Available with punches and dies from 2mm to 8mm, in 0.10mm increments Capability in 1.0mm standard mild steel ø 8mm Throat depth 15mm Overall length 315mm Weight 1.4 kg
SLOT PUNCH 11 101A Punching tool for oval holes 5 x 12mm, 6 x 12mm and 8 x 12mm as standard. Max. mild steel 1.5mm Throat depth 30 mm Overall length 430 mm Weight 2.2 kg
SLOT PUNCH 11 101B Punching tool for oval holes 6 x 20mm as standard. Max. mild steel 0.8 mm Throat depth 30 mm Overall length 320 mm Weight 2.2 kg
PUNCHING TOOL CURTAIN RAILS 41 401 Available with punches and dies from 2.0mm to 5.0mm, in 0.10mm increments Specially developed for all profiled aluminium curtain rails. Overall length 220 mm Weight 0.9 kg
PUNCHING/COUNTERSINKING 59 203 Punching and embossing in one operation. Special for 4mm and 5mm pop rivets, or other as required. Capability in 1.0mm standard mild steel ø 5.0mm Overall length 290mm Weight 1.1 kg
EDGE SETTER 61 201 A useful tool with hand-wearing rubber grips. The increased leverage makes work easier. Max. mild steel 1.0mm Jaw width 22mm Bending width 13mm Overall length 300mm Weight 1 kg
EDGE SETTER MINI 61 504 For working of small sheet edges - guards - panels - doors - parts etc. Bending tool - a good investment for bodywork repairs. The tool head is designed to enable folds to be made where the plate edges are very small. Max. mild steel 1.0mm Jaw width 10mm Overall width 90mm Bending width 13mm Overall length 220mm Weight 0.9 kg
EDGE SETTER 61 444 For round corners. Max. mild steel 1.0mm Jaw width 8mm Bending depth - round jaws 20mm Overall length 230mm Weight 0.9 kg
FOLDING TOOL 61 608 Applicable to edge folding for bodywork welding. The possibility for protection against rust on the underside of the plate is an added advantage. Max. mild steel 1.0mm Jaw width 18mm Overall width 20mm Overall length 225mm Weight 0.8 kg
DOOR SKIN EDGING TOOL 66 051 For joining metal sheets. Applicable for welding or gluing replacement panels on to bodies. A nylon pad prevents deformation of the flange on the outer side of the sheet. Width of nylon pad 40mm Overall length 310mm Weight 1.2 kg
PLANISHING TOOL FOR DOOR LOCKS 66 500 Adjusting tool for vehicle door locks. Jaw width 10mm Overall length 210mm Weight 0.9 kg
PLANISHING TOOL FOR DOOR LOCKS GOLF III 66 888 Adjusting tool for vehicle door locks. Jaw width 10mm Overall length 210mm Weight 0.9 kg
PNEUMATIC PUNCHER 63 302 Available with punches and dies from 2mm to 8mm, in 0.10mm increments An easy and useful puncher for thin sheet metal plate work. Capability in 1.0mm standard mild steel ø 8 mm Throat depth 15 mm Punching force 5,500 N Working compressed air pressure 8 bar Diameter - body 58 mm Overall length 240 mm Weight 1.3 kg
PNEUMATIC PUNCHER 63 805 A combined tool which can accept two punches of different diameters. Available with punches and dies from 2mm to 8mm, in 0.10mm increments Capability in 1.0mm standard mild steel ø 8 mm Throat depth 15mm Punching force 5,500 N Working compressed air pressure 8 bar Diameter – body 58mm Overall length 223 mm Weight 1.3 mm
PNEUMATIC COMBINED BENDING/PUNCHING TOOL 63 301 The ideal tool for bodywork component applications. The tool can rotate for optimum working position. Available with punches and dies from 4.0mm to 8.0mm as standard. Capability 1.0mm in standard mild steel ø 8 mm Bending capability 0.8mm to 1.0mm Jaw width 22mm Punching force 5,500 N Working compressed air pressure 8 bar Diameter - body 58mm Overall length 240mm Weight 1.4 kg
PUNCHING TOOL WITH LARGE STROKE 18 022 Accurate punch guides enable e.g. oval and square tools to be mounted. Available with punches and dies from 2.0mm to 10.0mm, in 0.10mm increments Capability in 2.0mm standard mild steel ø 10 mm Throat depth 50mm Overall height 150mm Overall width 60mm Length of stroke 35mm Overall length 550mm Weight 4 kg
PUNCHING TOOL 10 MM DIAMETER 11 210 Available with punches and dies from 2.0mm to 10.0mm, in 0.10mm increments Special form punches, e.g. oval and square, also available. Capability in 1.5mm standard mild steel ø 10 mm Throat depth 40mm Overall height 90mm Overall width 50mm Overall length 450mm Weight 3.5 kg
PUNCHING TOOL FOR HEAVY SHEET 11 102 The ideal tool for punching holes up to ø 10 mm. Available with punches and dies from 2.0mm to 10.0 mm, in 0.10mm increments Special form punches, e.g. oval and square, also available. Capability in 3.0mm standard mild steel ø 10 mm Throat depth 40mm Overall height 160mm Overall width 50mm Punching force 20,000 N Overall length 590mm Weight 6 kg
PNEUMATIC/HYDRAULIC TOOL 63 470 The combined tool head accepts two different punch sizes. Capability in 1.75mm standard mild steel ø 10mm Diameter - body 70mm Overall length 400mm Weight 4 kg
PORTABLE PNEUMATIC PUNCHER TR 13 101 As easy and useful puncher for thin sheet metal work. Available with punches and dies from 2.0mm to 8.0mm, in 0.10mm increments Capability in 1.5mm standard mild steel ø 8mm Throat depth 40mm Punching force 8,000 N Working compressed air pressure 8 bar Overall length 320mm Weight 4 kg

TAMA Tools & Machinery Pty Ltd
PO Box 445, Park Holme, SA 5043
Ph: 0417 820 307 Fax: (08) 8358 5952
E-mail: sales@tama.com.au