PO Box 75, Woodcroft Town Centre
     Woodcroft, SA, 5162
     Ph: (08) 8322 0611  Fax: (08) 8322 0622
     Email: sales@tama.com.au

Special Purpose Equipment Examples

TS 15200 - Pneumatic Puncher Senior

Capability in 1.5mm standard sheet.....................................Ø8mm
Throat Depth............................................................................40mm
Punching Force.......................................................................800 Kg
Working Pressure...................................................................8 bar
Overall width............................................................................75mm
Weight......................................................................................7 Kg

TS 13102 - Pneumatic Puncher Senior

Available with punches and dies from 2 to 8mm, in 0.1mm graduations.

Capability in 1.5mm standard sheet.....................................Ø8mm
Throat Depth............................................................................40mm
Punching Force.......................................................................800 Kg
Working Pressure...................................................................8 bar
Overall width............................................................................75mm
Weight......................................................................................7 Kg

TT 23101 - Pneumatic Puncher Junior

Capability in 1mm standard sheet........................................Ø5mm
Throat Depth............................................................................30mm
Punching Force.......................................................................260 Kg
Working pressure....................................................................8 bar
Overall width............................................................................45mm
Weight......................................................................................2 Kg

TH 63106 - Pneumatic Puncher

Low outlay and cost effective. Double-acting cylinder. Non-circular cross-section punches, e.g. square, oval, also available. Available with punches and dies from 2 - 8mm, in 0.1mm graduations.

Capability in 1.5mm standard sheet.....................................Ø8mm
Throat Depth...........................................................................150mm
Punching Force.......................................................................800 Kg
Working pressure....................................................................8 bar
Overall width............................................................................75 mm
Weight......................................................................................10 Kg

FF 11444 - Pneumatic Puncher

Low outlay and cost effective. Double-acting cylinder. Non-circular cross-section punches, e.g. square, oval, also available. Available with punches and dies from 3mm to 10mm, in 0.5mm graduations.

Capability in 2mm standard sheet........................................Ø10mm
Throat Depth...........................................................................150 mm
Working Pressure...................................................................8 bar
Punching force........................................................................1.200Kg
Overall width............................................................................75mm
Weight.....................................................................................18 Kg

TX-1 63104 - Pneumatic Puncher

With double-acting cylinder. Available with punches and dies from 8 to 28mm, in 0,5mm graduations. Non-circular cross-section punches, e.g. square, oval, also available. End-stop is an optional extra.

Capability in 1.5mm standard sheet....................................Ø28mm
Throat Depth...........................................................................150 mm
Working pressure...................................................................8 bar
Punching force........................................................................3.700 kg
Overall width............................................................................130mm
Weight......................................................................................55 kg

FF 11333 - Pneumatic Puncher

Capability in 1,5mm standard sheet....................................Ø10mm
Throat Depth...........................................................................40mm
Working pressure...................................................................8 bar
Punching force........................................................................1.200 kg
Overall width...........................................................................75mm
Weight....................................................................................13 kg

FF 11222 - Pneumatic Puncher

Capability in 1,5mm standard sheet...................................Ø10mm
Throat depth...........................................................................40mm
Working pressure..................................................................8 bar
Punching pressure................................................................1.200 kg
Overall width...........................................................................75mm
Weight.....................................................................................11 kg

FF 11888 - Pneumatic Puncher

Throat Depth........................................................................150mm
Punching Force...................................................................1200 Kg

Model # TBA

Capability in 3.5mm standard sheet.................................Ø28mm
Throat Depth........................................................................40mm
Working pressure................................................................8 bar
Punching Force...................................................................12.000 Kg
Overall width.........................................................................220mm
Weight..................................................................................70 Kg

TZ 63107 - Pneumatic Puncher

With double-acting cylinder. End stop is an optional extra.

Capability in 1.5mm standard sheet................................Ø28mm
Throat Depth.......................................................................55mm
Stroke..................................................................................12mm
Punching Force..................................................................3.700Kg
Working Pressure..............................................................8 bar
Overall width.......................................................................130 mm
Weight.................................................................................50 Kg

TT 63116 - Pneumatic Puncher

With double-acting cylinder. End stops is an optional extra.

Capability in 1.5mm standard sheet...............................Ø28mm
Throat Depth......................................................................150mm
Stroke.................................................................................12mm
Punching Force.................................................................3.700Kg
Working Pressure.............................................................8 bar
Overall width......................................................................130mm
Weight................................................................................60 Kg

TX 63103 - Pneumatic Puncher

With double-acting cylinder. Available with punches and dies from 8 to 28mm, in 0.5mm graduations. Non-circular cross-section punches, e.g. square, oval, also available. End-stop is an optional extra.

Capability in 1.5mm standard sheet................................Ø28mm
Throat Depth.......................................................................40mm
Working Pressure..............................................................8 bar
Punching Force..................................................................3.700 Kg
Overall width.......................................................................130mm
Weight.................................................................................35 Kg

TW 63101 - Pneumatic Puncher

With double-acting cylinder. Available with punches and dies from 4 to 18mm, in 0.5mm graduations. Non-circular cross-section punches, e.g. square, oval, also available. End-stop is an optional extra.

Capability in 1.5mm standard sheet................................Ø18mm
Throat Depth.......................................................................40mm
Working Pressure..............................................................8 bar
Punching Force..................................................................2.150 Kg
Overall width.......................................................................100mm
Weight..................................................................................18 Kg

TW-1 63102 - Pneumatic Puncher

With double-acting cylinder. Available with punches and dies from 4 - 18mm, in 0.5mm graduations. Non-circular cross-sections punches, e.g. square, oval, also available. End-stop is an optional extra.

Capability in 1.5mm standard sheet.................................Ø18mm
Throat Depth........................................................................150mm
Punching Force....................................................................2.150 Kg
Overall width.........................................................................100mm
Weight...................................................................................34 Kg

TY-1 63105 - Pneumatic Puncher

With double-acting cylinder. End stop is an optional extra.

Capability in 1.5mm standard sheet................................Ø18mm
Throat Depth.......................................................................55mm
Stroke..................................................................................12mm
Punching Force...................................................................2.150 Kg
Overall width.......................................................................100mm
Weight.................................................................................28 Kg

Sorry, No Picture !!
TY-1 63100 - Pneumatic Puncher

With double-acting cylinder. End-stop is an optional extra.

Capability in 1.5mm standard sheet................................Ø18mm
Throat Depth.......................................................................150mm
Stroke...................................................................................12mm
Punching Force...................................................................2.150 Kg
Overall width........................................................................100mm
Weight...................................................................................35 Kg

TO 20204 - Pneumatic Puncher

With double-acting cylinder. Available with punches and dies from 8 to 28mm, in 0.5mm graduations. Non-circular cross-section punches, e.g. square, oval, also available. End-stop is an optional extra.

Capability in 1.5mm standard sheet.................................Ø28mm
Throat Depth........................................................................500mm
Stroke...................................................................................12mm
Punching Force....................................................................3.700 Kg
Working pressure................................................................8 bar
Overall width.........................................................................200mm
Overall height without stand................................................860mm
Overall length........................................................................930mm
Weight...................................................................................215 Kg

Sorry, No Picture !!
TZ 63107 - Special Purpose Tool

Corner punching, cutting-in, punching and stamping attachments. Notching attachments and special-purpose tools supplied for customer specified problems.

HOME PAGE - ABOUT US - SPECIALS - HAND TOOLS - PNEUMATIC PRESSES - DIE SETS & PRESS TOOLING
ALUMINIUM FABRICATING EQUIPMENT WOODWORKING MACHINES -  
MACHINE VISION SYSTEMS
- SPECIAL PURPOSE BUILT MACHINERY - OTHER SERVICES - CONTACT US

TAMA Tools & Machinery Pty Ltd
PO Box 75 Woodcroft Town Centre, Woodcroft, SA, 5162
Ph: (08) 8322 0611   Fax: (08) 8322 0622
E-mail: sales@tama.com.au